Egy Gate | Security accessories Security accessories – Egy Gate

Security accessories

According to an information source of the italian research institute, 50% of burglaries happen through windows. in fact, most of them are committed by occasional thieves not prepared to face obstacles and accidents. Aluminum and steel rolling shutters discourage thieves from entering your home, thanks above all to their breaking strength. moreover there is a wide range of security accessories that can be installed in several parts of the rolling shutters to avoid its enrolling, thus increasing thefts prevention.

Croci

   Locking systems end slats

 

ALUMINIUM OR STEEL SECURITY LATCH
Composed of a specially formed aluminum or steel bar and of a PVC anti-slide handle. Fixed on end slats (except universal type) without any further processing, due to the particular form of the end slat. It is manually activated and, when it is introduced into the wall and into the lateral guide rails, it avoids the bottom of the rolling shutter from lifting. Also available in models for intermediate profiles (suggested for TE12x55 profile).

Croci

STEEL-REINFORCED SECURITY LATCH
Composed of a steel bar locking handle, fixed on the TS12X55 and TE7X56 end slat which has been specially worked. It is manually activated and, when inserted into the wall and into the lateral guide rails, it avoids the bottom of the rolling shutter from lifting.

Croci

KEY LOCK
The thumb lock (with knob) can be activated from the inside, whereas the key lock can be activated both from the inside and the outside. It is fixed on the 14×56 end slat (except the universal type). It is composed of two aluminum bars inserted first into the guide rails and then into the wall, which prevents any shutter rising.

Croci

   Locking system intermediate

 

INTERMEDIATE STEEL LOCKING SYSTEM
It is fixed on a profile slat (with special working) at the required rolling shutter height. It can be used for 55 mm profiles (AR/32, SAR/132, AC/55, SAC/155, U/55, SU/155). It is manually activated and, when inserted into the wall and into the lateral guide rails, it avoids the bottom of the rolling shutter from lifting.

Croci

   Locking system automatic anti-lifting system

 

It is fixed on the roll tube and on the last slat of rolling shutter (every 50 cm.) and it can be used both with crank and motor operation. It activates automatically when the shutter is pulled down and its applies a pressure which avoids the bottom of the rolling shutter from lifting. This product ( an international Croci patent) is available in 3 models (for tube ø 40, 60 and 70) and respond to all necessities, in fact the regulation of the distance from tube roller can be made directly during the installation.

Croci